Graco SDP8 Series Installation And Operation Manual page 23

UNIT OF MEASURE
The meter is factory-set to quarts. The UNIT
OF MEASURE screen configures the meter
to dispense in PINTS, QUARTS, GALLONS
OR LITERS. This screen also includes a GO
BACK option to return to the Utility Menu
screen.
F . 42
IG
1. Use the UP or DOWN ARROW button on
the keypad to select the desired unit of
measure from the displayed list: PINTS,
QUARTS, GALLONS, LITERS or GO
BACK.
2. When the desired unit of measure is
highlighted, press the center ENTER
button on the keypad.
3A6673B
BANNER
The banner screen is used to assign a name
to the meter, such as Meter 1, Meter 2, etc.
This is useful in shops that have more than
one meter in their system.
Names can be made up of any combination of
letters or numbers.
The maximum number of characters is 15.
F . 43
IG
1. Use the UP, DOWN, LEFT and RIGHT
ARROW buttons on the keypad to select
letters and numbers needed to name the
meter.
2. Press the center ENTER button on the
keypad after each desired letter or
number is highlighted to select it.
3. When you have finished naming the
meter, use the RIGHT ARROW button
on the keypad to highlight the  symbol.
Press the center ENTER button on the
keypad to return to the SET-UP Menu
Screen.
NOTE: The BANNER created displays
on the top left corner of the screen.
Preset Mode
23