Battery Charging After Prolonged Inactivity; Operating Tips - Stiga Autoclip M3 Operator's Manual

Hide thumbs Also See for Autoclip M3:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EN
Danger - Attention
Do not recharge the robot in explosive and
flammable environments.
1. Supply electricity to the charging station and make sure the
plates are clean.
2. Position the robot inside the charging station.
3. Press the ON/OFF key and wait a few seconds for the robot to
turn on completely.
4. The battery LED turns orange and remains fixed for a few
seconds during recognition of the charging station.
5. Make sure the AUTO LED is off, if necessary press the AUTO
key to turn it off.
6. At the end of the charging cycle (approx. 6 hours), press the
"OFF" key (C).
7. Store the robot in a protected and dry place with an ambient
temperature between 10° and 20° C, difficult to reach by
children, animals, other foreign objects, etc.
Below are some useful operating tips to follow when using the robot:
-
even after being suitably informed on the use of the robot, it is always a good idea to simulate some test manoeuvres on first
use to identify the commands and main functions;
-
check and secure the fastening screws of the main components;
-
mow the lawn frequently to avoid excessive growth of the grass;
-
do not use the robot to mow grass which is 1 cm (0.40 ") higher than the cutting blade. In case of high grass, lift the cutting
blade and then lower it gradually on the following days;
-
if the lawn is equipped with an automatic sprinkler system, program the robot to return to the charging system at least one
hour before the sprinklers are turned on;
-
check the slope of the ground and make sure the maximum values allowed are not exceeded in order to prevent damage to
the robot and the sprinklers;
-
it is recommended to program the robot so that it does not work more than is necessary, also taking into consideration the
different growth rates of the grass in different seasons, so as not to subject it to unnecessary deterioration and reduction of
the battery life;
-
when using the robot, make sure the work area is clear of people (in particular, children, the elderly or disabled people) and
pets in order to prevent safety risks. To minimise the chance of injury, program the robot so that it operates at suitable times
of the day.
The manufacturer does not guarantee complete compatibility between the robotic mower and other types of wireless systems,
such as remote controls, radio transmitters, acoustic aids, underground electric fences for animals or the like.
User's manual

BATTERY CHARGING AFTER PROLONGED INACTIVITY

OPERATING TIPS

STOP
START / PAUSE
AUTO
ON / OFF
HOME
AUTO
ALERT
26
"PLAY/PAUSE" KEY (B)
"ON" KEY (A)
"OFF" KEY (C)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autoclip m5

Table of Contents