Setting Up Of The Perimeter Wire - Stiga Autoclip M3 Operator's Manual

Before installing the perimeter wire, it is necessary to check the
entire surface of the lawn. Make any necessary adjustments to the
grassy surface during the laying of the perimeter wire in order to
allow the robot to function correctly.
1. Preparation and defining of the work areas.
2. Installation of the perimeter wire.
3. Installation of the charging station and power supply unit. When
laying the perimeter wire, respect the installation direction
(clockwise) and the rotation direction around the flowerbeds
(counter-clockwise), As shown in the figure.

SETTING UP OF THE PERIMETER WIRE

11
track for laying the perimeter wire
User's manual
EN