Stiga Autoclip M3 Operator's Manual page 33

Problem
ALERT
Fixed orange light
The led
(c) does
not turn on
The
transmitter
LED (C)
is on
Cause
Irrecoverable error.
No power supply
Interrupted fuse
Interrupted perimeter wire
31
Remedies
Turn the robot off and on.
If the problem persists, contact your nearest
authorised service centre.
Make sure the power supply unit is correctly
connected to the power outlet
Have the fuse replaced by your nearest
authorised service centre
Stop the robot safely (see "Robot Safety Stop").
Disconnect the power plug from the power
supply unit. Join the perimeter wire
EN
User's manual