Setting The User Menu Via The Mobile Application; Settings - Programming Mode - Stiga Autoclip M3 Operator's Manual

Start the application from your smartphone and access the robot programming menu via the "Setup" function.
Follow the introduction containing a summary of the programming functions available. Details of each function are found in
EN
the pages following the flow diagram. The functions marked with (*) are only available on some models. See the "Technical
Specifications" table.
Setting
Rain sensor
Program
Working time 1
Working time 2
Working days
Edge cutting
Secondary areas
Secondary area 1
RAIN SENSOR: Function for setting the robot in case of rain.
•
Enable: in case of rain, the robot returns to the station and remains in "charging" mode. At the end of the charging cycle, the
robot only starts mowing again if it has stopped raining.
•
Disable: in case of rain, the robot continues to mow.
DATE: function for setting the date.
TIME: function for setting time.
User's manual

SETTING THE USER MENU VIA THE MOBILE APPLICATION

Date
Time
SETTINGS – PROGRAMMING MODE
Determines the behaviour in case of
rain
Sets the date
Sets the time
Determines the first working time of the robot
Determines the second working time of the robot
Allows setting the work days and rest days
Schedules the days in which to cut the outer edge.
Determines the setting for a possible
secondary area 1, indicating the size
of the area, the distance from the
charging station and the direction to
reach it
22
Enable
Disable
Percentage
Distance
Direction