Part Replacement; Recommendations For Replacing Parts; Battery Replacement; Blade Replacement - Stiga Autoclip M3 Operator's Manual

PART REPLACEMENT

EN
Important
Replace and repair any parts according to the manufacturer's instructions, or contact the service centre if
these operations are not included in the manual.
Important
Replace the batteries at an authorised service centre.
1. Stop the robot safely (see "Robot Safety Stop").
Important
Use protective gloves to prevent injuries to your hands.
For replacement, use only the original blade suitable for the device.
MODEL
Cutting blade code
2. Turn the robot over and position it so as not to ruin the covering
hood.
3. Unscrew the screws (B) to remove the blade (A).
4. Insert a new blade and fasten the screws.
5. Turn the robot back over to its operating position.
User's manual

RECOMMENDATIONS FOR REPLACING PARTS

BATTERY REPLACEMENT

BLADE REPLACEMENT

Autoclip M3 Autoclip M5
122104113/0 122104111/0
blade (A)
32
screws (B)