Table of Contents
Advertisement
4.5.3.5
Operation
The operation mode of MAGIC EEC is indicated under Mode.
The following status messages are also displayed:
– Time Reference Sync: This LED shows when the newly generated time
information (time reference and TIST) is valid.
4.5.3.6
References
Under References the following alarms and status messages are indicated:
– NTP: Display of the IP address of the connected NTP Server. The alarm is
set if both NTP servers are not available.
– 1 PPS: The 1 pps clock is faulty.
– Clock 2: 10 MHz or 2.048 MHz: The reference clock is faulty.
4.5.3.7
System Clock
Here it is indicated which system clock is currently used.
– Clock 2: 10 MHz or 2.048 MHz (see CHAPTER 4.7.2.1.1, Page 35)
– Internal
W i n d o w s
P C
S o f t w a r e
P A G E 3 1
Advertisement
Table of Contents
