Table of Contents
Advertisement
4.7.2
Submenu System
Via the submenu System MAGIC EEC can be configured completely.
After the configuration has been changed, the following options are available:
• With OK the configuration dialogue is closed and all settings are saved
and applied to the system.
• The function Apply Now allows you to save the current settings without
closing the configuration dialogue.
• Cancel cancels all settings made.
The configuration differentiates between System Settings, which usually do
not have to be changed during the operation and the actual Operation Set-
tings for the current operational case.
4.7.2.1
Operation Settings
4.7.2.1.1
EEC Parameters
Under EEC Parameters the operating mode for MAGIC EEC is configured.
FIG. 7
Operation
• Please select the desired operation mode for the system under Mode. You
can chose between
– ETI to EDI Converter
– EDI to ETI Converter
• Under Clock 2 you can select if you want to operate the system with a
10 MHz clock or a 2.048 MHz clock.
W i n d o w s
EEC PARAMETERS
P C
S o f t w a r e
P A G E 3 5
Advertisement
Table of Contents
