Table of Contents
Advertisement
4.7
Menu Configuration
4.7.1
Submenu Control Interface
The system is configured and operated via the LAN interface.
Select under Configuration
LAN
For controlling the system via the LAN interface please select Ctrl. Interface
→
LAN (UDP).
FIG. 5
Under LAN Interface please select <Default>. If there should be more than
one network interface card in your PC, select the desired one. If more than one
IP address is assigned to a network interface, please make sure you the select
the correct one. The IP addresses are displayed together with the network in-
terfaces.
Under IP Address you need to enter the IP address of the MAGIC EEC. The
standard IP address of the system is 192.168.96.102 and the standard control
Port 10000. The default interface is the LAN 1 interface.
To enable a connection with your PC, you have to be in the same subnet.
Therefore, please enter an IP address from your subnet
To change the IP address of the LAN 1 interface at the front keypad of the sys-
tem, press the softkey
dress
. Enter now the desired IP address. When entering manually you have
to be sure that the IP address is not already used by another unit
NOTE
Maybe further settings are necessary (e.g. sub-net mask, standard:
255.255.255.000). In that case please contact your network administrator, who
can tell you the correct settings.
TIP
The currently allocated IP address of the system can be displayed by pressing
the right telephone button
Please enter the correct IP address of the system under IP Address.
1
In this way you can find out your own subnet: Under Windows XP click on Start → Execute ....
Enter cmd in the command line. An entry window is displayed in which you must enter ipcon-
fig. Your IP address is displayed (e.g. 192.168.12.35). Your subnet is accordingly 192.168.12.xxx.
2
To check if the IP address is already used in the network, follow the instructions: Under Windows
XP click on Start → Execute .... Enter cmd in the command line. An entry window is displayed
in which you must enter ping xxx.xxx.xxx.xxx. Whereas xxx stands for the IP address you want
to check.
W i n d o w s
→
Control Interface.
LAN PARAMETERS
→
Menu
system settings
.
P C
S o f t w a r e
1
.
→
→
LAN Interfaces
IP Ad-
2
.
P A G E 3 3
Advertisement
Table of Contents
