Table of Contents
Advertisement
W i n d o w s
P C
S o f t w a r e
P A G E 2 4
After the installation the software can be started by clicking on the MAGIC
EEC symbol on the desktop.
Connect the system via the LAN interface with your network. If you do not
have a network you can also connect the unit to your PC directly via a so-
called cross over network cable.
How to configure the LAN interface is described below (see CHAPTER 4.7.1,
Page 33).
4.4
Software update from the internet
Software updates can be downloaded from our homepage
free of charge. Please note that you need to register yourself on our homepage
to have access to the download area. Go to Create an account under the Log
In section and enter your name and email address. Define a user name and
click on Register. You will receive a confirmation email that includes a link
which allows you to activate your account. If you are already registered, you
just need to log in.
Now, please go to our Download section and select Software. Under MAGIC
DAB please download the file with the order number 430444. When the
download is completed, execute setup and follow the instructions.
In addition to the PC Software, the setup also includes the Firmware for the-
system. If it also has to be updated, the MAGIC EEC Software displays an er-
ror message when it is started. The instructions for a Firmware update are de-
scribed in CHAPTER 4.8.4, Page 53.
http://www.avt-nbg.de
Advertisement
Table of Contents
