Putting Magic Ae4 Into Operation; Mounting - AVT MAGIC AE4 DAB/DAB+ Hardware Manual

Audio encoder
Hide thumbs Also See for MAGIC AE4 DAB/DAB+:
Table of Contents

Advertisement

2

PUTTING MAGIC AE4 INTO OPERATION

2.1

Mounting

With its dimensions (W × H × D) of 434 mm × 44,5 mm (1 U) × 252 mm the MAGIC
AE4 system can either be used as desktop device or mounted into a 19-inch rack.
19"mounting brackets are included in delivery. When mounting the unit please keep
in mind that the bending radius of the connected cables is always greater than the
minimum allowed value.
When the MAGIC AE4 is installed, please make sure that there is sufficient cooling: It
is recommended to keep a spacing of ca. 3 cm from the openings. In general, the
ambient temperature of the system should be within the range of +5 °C and +45 °C.
These thresholds are specially to observe if the system is inserted in a rack. The
system works without ventilation.
The system temperature can be indicated on the display under MENU > STATUS
INFORMATION > DEVICE TEMPERATURE or in the software under Extras > System
Monitor > System Temperature.
During operation humidity must range between 30% and 85%.
Attention! Incorrect ambient temperature and humidity can cause functional de-
ficiencies.
Improper use of the unit can lead to a loss of warranty claim.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

804105

Table of Contents