Table of Contents
Advertisement
W i n d o w s
P C
S o f t w a r e
P A G E 4 6
• To Send all traps at system startup, please enable the respective option.
• If you want to Send traps immediately after enabling them, please tick
the corresponding option. As soon as you select a alarm trap from the list,
it will be sent via SNMP.
• Under Alarm traps you can select which traps should be sent via SNMP.
To enable all listed traps, you can press the Set All button. Via the Clear
All button the selection will be cleared.
4.7.2.4
Date and Time
Via the dialogue Date and Time you can program the system date and time.
• Via the button Transmit PC Time you can synchronise the system time
with the PC time.
• The button Transmit User Defined Time allows you to set a different
time. This function is helpful, if you want to use the system later on e.g in
a different time zone.
NOTE
The settings Date and Time cannot be changed when NTP is enabled.
FIG. 18
ATTENTION
During a power breakdown the integrated system clock is buffered by an in-
ternal battery
ment should only be done by the AVT Service.
!
a
Type: 3V Lithium Battery Renata CR1220
DATE AND TIME
a
. The life time of a battery is typical ca. 7 years. The replace-
Advertisement
Table of Contents
