W i n d o w s
P C
S o f t w a r e
P A G E 2 6
– blue: error has occured
To reset all LEDs to green, you need to press the Reset Counter button.
4.5.1.1
Interface 1
Under Interface 1 and Interface 2 the input state of the connected systems is
displayed. The status messages can be
– OK
– FAILURE
4.5.1.2
Reset Counter
On the bottom right side you will find the Reset Counter button. If you press
this button, all LEDs will be reset to green and all error counters are reset to 0.
4.5.2
The MAGIC EEC main window - ETI to EDI Converter
To operate the MAGIC EEC as ETI to EDI Converter, please select under Con-
figuration
Mode the option ETI to EDI Converter (see CHAPTER 4.7.2.1.1, Page 35).
FIG. 3
→
→
System
Operation Settings
MAIN WINDOW - ETI TO EDI CONVERTER
→
→
EEC Parameters