Interfaces; Interface Overview - Siemens SIMOTION D4 5-2 Series Manual

Interfaces

3.1

Interface overview

This section describes the interfaces of the SIMOTION D4x5-2.
The position of the interfaces on the module can be found in the following sections:
● Representation of SIMOTION D425-2 DP and D435-2 DP (Page 22)
● Representation of SIMOTION D425-2 DP/PN and D435-2 DP/PN (Page 24)
● Representation of SIMOTION D445-2 DP/PN and D455-2 DP/PN (Page 26)
Available interfaces
Table 3- 1
Interface
DRIVE-CLiQ interface
DRIVE-CLiQ interface
DRIVE-CLiQ interface
DRIVE-CLiQ interface
DRIVE-CLiQ interface
(not for SIMOTION D425-2)
DRIVE-CLiQ interface
(not for SIMOTION D425-2)
Ethernet interface PN/IE
PN/IE OP Ethernet interface
(only for SIMOTION D4x5-2 DP)
Ethernet interface PN/IE-NET
PROFINET PN IO interface
(only for SIMOTION D4x5-2 DP/PN)
Digital I/Os
Power supply connector
PROFIBUS DP interface
PROFIBUS DP/MPI interface
Measuring sockets (T0, T1, T2, and M)
SIMOTION CF plug-in
Fan/battery module interface
SIMOTION D4x5-2
Manual, 02/2012
Overview of available interfaces
Designation
X100
X101
X102
X103
X104
X105
X127 P1
X120 P1
X130 P1
X150 (P1, P2, P3)
X122, X132, X142
X124
X126
X136
X141
X109
X190/X191
Connector type
DRIVE-CLiQ socket
DRIVE-CLiQ socket
DRIVE-CLiQ socket
DRIVE-CLiQ socket
DRIVE-CLiQ socket
DRIVE-CLiQ socket
RJ45 socket connector
RJ45 socket connector
RJ45 socket connector
RJ45 socket connector
Mini Combicon, 3.5 mm
3x14-pin
Combicon, 4-pin
9-pin Sub-D socket
9-pin Sub-D socket
4-pin, socket
CompactFlash card connector
Fan/battery module
3
47