Terminal Module Tm31 - Siemens SIMOTION D4 5-2 Series Manual

Supplementary system components

6.6 Terminal module TM31

6.6 Terminal module TM31
Properties of the TM31
With the TM31 terminal module, the number of available digital inputs/digital outputs and the
number of analog input/analog outputs within a drive system can be expanded. The TM31 is
connected via DRIVE-CLiQ. It has two DRIVE-CLiQ interfaces for this.
The TM31 contains the following terminals:
Table 6- 36
Interface
Digital inputs
Bidirectional I/Os
Relay outputs with changeover contact
Analog inputs
Analog outputs
Temperature sensor input (KTY84-130 or PTC)
The 50 mm clearances above and below the components must be observed.
Additional references
You will find detailed information about the TM31 in the
●
●
128
Interface overview
CAUTION
SINAMICS S120 Control Units and Additional System Components
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual.
Number
8
4
2
2
2
1
Manual
SIMOTION D4x5-2
Manual, 02/2012