Siemens SIMOTION D4 5-2 Series Manual page 53

Position of connectors for SIMOTION D4x5-2 DP/PN
The following figure shows the position of the Ethernet interfaces on the D4x5-2 DP/PN and
their displays.
Figure 3-3 The position of the Ethernet interfaces and their displays (example of SIMOTION D445-2 DP/PN)
Note
As of V4.3, the two Ethernet interfaces support the PROFINET basic services - they
therefore have the designation PN/IE-NET or PN/IE.
These PROFINET basic services (e.g. DCP, LLDP, SNMP) provide uniform functions for the
address assignment and diagnostics, but do not provide PROFINET IO communication for
the connection of drives, I/O modules, etc.
Additional references
Detailed information on the states of the status LEDs can be found in the
Commissioning and Hardware Installation Manual,
SIMOTION D4x5-2
Manual, 02/2012
3.3 Ethernet interfaces
SIMOTION D4x5-2
Diagnostics
chapter.
Interfaces
53