Siemens SIMOTION D4 5-2 Series Manual page 83

Digital inputs
Table 4- 14
Data
Digital inputs
•
•
•
Galvanic isolation
Current consumption typ. at signal level "1"
Input delay, typ. (hardware)
1)
2)
Digital I/Os (parameterizable)
Table 4- 15
Data
Digital I/Os
If used as an input
•
•
•
Galvanic isolation
Current consumption typ. at signal level "1"
Input delay, typ. (hardware)
Measuring input, resolution
Measuring input, reproducibility
If used as an output
•
•
•
•
•
SIMOTION D4x5-2
Manual, 02/2012
Digital inputs on SIMOTION D4x5-2
Rated value
For signal "1"
For signal "0"
2)
Reference potential is terminal M1 or M2
The digital inputs are protected against polarity reversal up to -30 V
Digital I/Os on SIMOTION D4x5-2
Input voltage, rated value
Input voltage, for signal "1"
Input voltage, for signal "0"
Rated load voltage, permissible range
Galvanic isolation
Current load, max.
Residual current, max.
Output delay, typ./max. (hardware)
SIMOTION D4x5-2
12
24 VDC
15 ... 30 V
-3 ... +5 V
Yes, in groups of 6
9 mA at 24 V
L -> H: 50 µs
H -> L: 150 µs
SIMOTION D4x5-2
16
Max. 16 as inputs of measuring inputs
•
Max. 8 as cam outputs
•
24 VDC
15 ... 30 V
-3 ... +5 V
2)
No
9 mA at 24 V
L -> H: 5 µs
H -> L: 50 µs
1 µs
5 µs
24 VDC, 20.4 ... 28.8 V
No
500 mA per output
2 mA
L -> H: 150/400 µs
1)
H -> L: 75/150 µs
Technical data of the D4x5-2
4.5 Interfaces and performance features
1)
83