7.3
Terminal board TB30
Features of the TB30
The TB30 is a terminal expansion module that can be inserted in the D4xx.
The TB30 contains the following terminals:
Table 7-1
Interface
Digital inputs
Digital outputs
Analog inputs
Analog outputs
Additional references
You can find additional information about the TB30 option board in the SINAMICS S120
product manual and the SINAMICS S120 commissioning manual.
Caution
The Option Board may only be inserted and removed when the D4xx Control Unit and the
TB30 Option Board are deenergized.
7.4
Terminal module TM31
Features of the TM31
With the terminal module TM31, the number of available digital inputs and outputs and the
number of analog input and outputs within a drive can be expanded The TM31 can be
connected by means of DRIVE CLiQ. It has 2 DRIVE CLiQ interfaces for this purpose.
The TM31 contains the following terminals:
Table 7-2
Interface
Digital inputs
Bidirectional inputs/outputs
Relay outputs with changeover contact
D4xx
Manual, 12.2004, 6AU1900-1AJ32-0BA0
Overview of TB30 interface
Interface overview of the TM31
Spare parts/accessories
7.3 Terminal board TB30
Number
4
4
2
2
Number
8
4
2
7-5