Gree GMV5 Series Service Manual page 292

5. Software
5.1 List of Parts
Table 4. Parts of Gree CAC Remote Monitoring System
Part Quantity
Disk 1
Installation guide 1
5.2 Preliminary Check
Check whether the Modbus gateway has been successfully debugged. If not, refer to the Technical
Service Manual of Modbus Gateway to debug the gateway.
Check whether the server has serial ports. If not, replace the server with one that has serial ports.
Check whether the server is configured with driver that can read disks. If not, replace the server with one
that has driver.
Check whether the server satisfies the following software configuration requirements.
Table 5. Software configuration of Gree CAC Remote Monitoring System
Part Name
Internet Information
Service (IIS) manager
MSMQ
Memory
Hardware
CPU
OS
Note
Gree CAC Remote Monitoring System supports Windows Server 2003 SP2 or later versions and
Windows 7. Windows Server 2003 SP2 is recommended because the server can better provide users
with services in Windows Server 2003 SP2 system.
5.3. Software Setup
The software needs support of some Windows components in order to run; therefore, you should install
these components first before setup. The following installation flowchart shows you the basic installation
procedure. If some of the components have been available on your PC, you can skip corresponding
steps.
GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
Supply Range
SC
SC
Min. Configuration
6.0 or later versions
/
1 GB or larger
10 GB available
Main frequency: 2 GHz or higher
Windows Server 2003 SP2 or
later versions, Windows 7
Purpose
Used for installing Gree CAC Remote
Monitoring System on a PC
Providing instruction on the installation of
Gree CAC Remote Monitoring System
289
Recommended
Configuration
6.0
/
2 GB or larger
10 GB available
2 GHz or higher
Windows Server
2003 SP