Gree GMV5 Series Service Manual page 256

GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
5. Using Debugger
5.1 Major Functions
5.1.1 One-Click Engineering Debug
Engineering debug personnel can use this software to debug units based on engineering debug logic by
one-click operation. The minute you deliver a debug command through the software, units begin
automatic debug step by step. When the units pass debug of a step, the step is automatically checked
green. If they fail this step, it will be checked red.
5.1.2 All-Round Monitor and Health Analysis
All-round monitor on the air conditioning systems, including functions, devices, and parts is supported.
Intuitive and clear display facilitates users to understand running of the entire systems and units.
5.1.3 Real-Time Control and Running Mode Adjustment
Air conditioner operation time and requirement on the air conditioners vary with geographical locations.
Users can adjust parameters of air conditioning units through a PC based on the actual situation of an
area, including start/stop, temperature, airflow speed, and mode. Gree Debugger also enables users to
set and query parameters for ODUs and gateways.
5.1.4 Other Functions
Gree Debugger also instructs users to connect units, and allows users to capture screens, open
database files, rebuild database, and modify database file saving path.
5.2 How to Use Gree Debugger
5.2.1 Viewing Unit Parameters
Run Gree Debugger.
On the initial page, select a language and unit. If you want to use default settings, click ―OK‖ to enable
Gree Debugger.
Select a language.
253