Gree GMV5 Series Service Manual page 200

4. Screw the
separator onto the
chassis
Step 9: Install a new oil balancer.
The original oil balancer, if is found to have no impurities or other objects, can be used further more. This
part serves as a container and it does not have complex structure. However, if it contains impurities or
other objects, replace it. This is because a dirty oil balancer cannot be thoroughly cleaned.
4. Weld the oil
balancer
components
Step 10: Install a new oil separator.
If the original oil separator contains impurities inside, replace it.
GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
2. Connect the
inlet pipe of the
separator with
the outlet pipe
3. Weld the
pipes together
1. Put the
gas/liquid
separator on a
proper position
2. Weld the
connecting pipes
of the oil balancer
1. Put the oil
balancer on
a proper
position
3. Screw the
oil balancer
197