IBM Power Systems 9008-22L Manual page 38

Figure 24. Replacing the air baffle
3. Replace the service access cover. For instructions, see "Installing the service access cover on a
rack-mounted 9008-22L, 9009-22A, or 9223-22H system" on page 42.
4. Place the system into the operating position. For instructions, see "Placing a 9008-22L, 9009-22A, or
9223-22H system into the operating position" on page 46.
5. Reconnect the power cords to the system. For instructions, see "Connecting the power cords to the
9008-22L, 9009-22A, or 9223-22H system" on page 50.
6. Start the system. For instructions, see "Starting the system" on page 34.
7. Turn off the identify LED. For instructions, see "Deactivating an identify LED" on page 77.
8. Verify the installed part.
v If you replaced the part because of a service action, verify the installed part. For instructions, see
Verifying a repair.
v If you installed the part for any other reason, verify the installed part. For instructions, see
"Verifying the installed part" on page 52.
22
Power Systems: System processor modules for the 9008-22L, 9009-22A, or 9223-22H