Installation Of The Main Circuit Fuses - Linde E25 Service Training

Service Training
2.6.3.3

INSTALLATION OF THE MAIN CIRCUIT FUSES

Carry out the installation of the main circuit fuses (plate fuses) according to the following illustration.
The two plate fuses must each be mounted with brass washers (3) on the top and bottom. Subsequently,
torque the hexagonal nut (1) to 20 Nm.
1,6 Nut
2,9 Lock washer
3,5,8 Brass washer
4 Fuse
7 Cable
Section 2.6
Page 23