Read-Out Functions With Menu Functions 41 To - Linde E25 Service Training

Service Training

2.6.11.1.4 READ-OUT FUNCTIONS WITH MENU FUNCTIONS 41 TO 43

The data for motor overheating, brush wear and discharge limits can be read out of the memory of the
combined instrument. The respective motor number and the service hours are displayed.
- Connect the diagnostic unit to the truck data connector. The data connector is located behind the
left switch cover at the instrument panel.
- Turn on the key switch.
- Depress the EIN (on) button. If the internal batteries are OK, the following message will appear on
the display
- After the battery test there will appear
- Depress the DATEN NEU (new data) button.
- Enter the menu number.
- The selected menu number (MN) will appear and the current number of service hours (BH) and, if
necessary, the motor number (N).
Batterie OK
*Linde Test Module**
** Version 2.94 **
** Device Ready **
* No Data received *
MN BH N
BH N
BH N
BH N
Section 2.6
Page 87