Resetting The Service Interval Indicator With Menu Function - Linde E25 Service Training

Service Training

2.6.11.1.2 RESETTING THE SERVICE INTERVAL INDICATOR WITH MENU FUNCTION 31

- Connect the diagnostic unit to the truck data connector. The data connector is located behind the
left switch cover at the instrument panel.
- Turn on the key switch.
- Depress the EIN (on) button. If the internal batteries are OK, the following message will appear on
the display
- After the battery test there will appear
- Depress the DATEN NEU (new data) button.
- Enter menu number 31.
- The selected menu number will appear and also the current service interval setting (factory setting
is 250 hrs).
- The service hours at which the service interval indicator was last reset are shown in the second line
of the display.
- Depress the ENTER button.
- The service interval indicator is reset and in the third line of the display there appears the operating
hours at which the service interval indicator will next be illuminated.
Batterie OK
*Linde Test Module**
** Version 2.94 **
** Device Ready **
* No Data received *
31 250
XXXXXX
31 250
XXXXXX
XXXXXX
* Data end *
Section 2.6
Page 85