Regenerative Braking - Linde E25 Service Training

Section 2.6
Service Training
Page 54
2.6.6.9

REGENERATIVE BRAKING

As described in the main circuit section, regenerative braking can be initiated in one of two ways.
1. By selecting the opposite direction with the accelerator pedal or the directional switch.
When the truck reverses, the accelerator sensor signal at 1X13:24 changes to the opposite direction, causing
regenerative braking to be initiated. On trucks with a directional switch, regenerative braking is controlled
via the terminals 1X13:22 and 1X13:18.