Linde E25 Service Training page 133

Service Training
The table below serves as a programming aid for the various types of batteries and applications. Depending
on the application and type of battery, menu numbers 22 and 23 can be altered according to the following
table. A detailed description regarding the application of the diagnostic unit in connection with the combined
instrument is given in section 2.6.11.
Type of Application
and Battery
Particularly heavy duty
Battery charging under
4 hrs required
Particularly light duty
Battery charging once
a week
Trucks with many options
(basic loads e.g.
heater, etc.)
Performance enhanced
PzS battery
PzV battery
CSM battery
The battery discharge indicator is reset to "battery fully charged" by the increase in cell voltage after charging
of the battery. This cell voltage is programmed to be 2.09 V per cell as standard value. This value can be
modified with menu item 22. The cell voltage value must be applied for a certain period of time after turning
on the key switch before the discharge indicator is reset. When the truck is delivered, this value is set to 0.1
min. This time can be changed with menu item 24.
Time for Reduction
Too early
Too late
Too late
Too late
Too late
Too late
Change in Menu
No. 22.
Reduce
Increase
Increase
Increase by 0.03 V
Increase by 0.06 V
Increase by 0.09 V
Section 2.6
Page 79
Change in Menu
No. 23
Increase
Increase
Increase
Increase
Increase
Increase