Linde E25 Service Training page 137

Service Training
The programming possibilities of the diagnostic unit in conjunction with the combined instrument depend
on the software version of the combined instrument. The software version is given on a label affixed to the
side of the instrument.
For example: SW Vers.2.1 means Software Version 2.1
From software version 3.0 on, the software version appears in the display after the self-test when the key
switch is turned on.
Since the development of the combined instrument, three software versions have been created. The
following table shows which function is implemented with each software version. Only the combined
instrument with the latest software version is available as replacement part.
Menu No. Function
11 Fan version
12 Hour meter
Variant
13 Service interval
14 Number of motors
15 Thermal sensor
21 Battery type
22 Upper end of characteristic
23 Discharge indicator cut-out point
24 Discharge indicator disable time
31 Reset service lamp
32 Service hours (accelerator depr.)
33 Service hours (accelerator depr.)
34 Service hours of 2M1
35 Total service hours
41 Motor overheating
42 Brush wear
43 Discharge limit
Active from Software Version
3.1
3.1
2.1
3.1
3.1
3.1
2.1
3.1
2.1
2.0
3.1
3.1
3.1
3.1
3.1
3.1
3.1
Section
Page
Implemented in truck since
7/95
7/95
4/94
--------
7/95
4/94
4/94
4/94
4/94
9/94
7/95
7/95
7/95
4/94
7/95
7/95
4/94
2.6
83