Operation; Operation Via Key Switch; Operation Of The Key Switch; Status Display - Assa Abloy ePED 1386-00 Installation And Fitting Instructions

Tab. 1 :
Operation of the
key switch
Tab. 2 :
(right table)
Reading the

status display

Tab. 3 :
LED and acoustic
signal status
indication
EN
20

Operation

Operation via key switch

Operation of the ePED
takes place with a key. The key can be turned to the left or right mechanical stop.

Operation of the key switch

Turn The key is turned to the mechanical stop in the indicated direction
and then back to the original position (Tab. 1).
Hold The key is turned to the mechanical stop (for the specified time) in
the indicated direction and held there until the specified event occurs
(Tab. 1).
Left-hand
Turn
Hold
Status display
The status display of the ePED
red, and yellow LEDs of the Emergency Open module 1386D00 and via acoustic
alarm signals (Tab. 2, Tab. 3).
LED statuses and acoustic signals
LED statuses
LED has gone out
LED permanently illuminated
LED flashes (Tab. 2)
®
1386-00 door terminal via the key switch module 1385ES2
Right-hand
®
1386-00 door terminal takes place with the green,
Acoustic signals
Status display
gn
gn
rd
20:1
The green, flashing
LED is on 20 times
longer than off
Acoustic alarm/signal tone
gn
gn
gn ye
Operation