Lock Activation
The touchscreen can be activated in several ways:
Touch screen with
back of hand or
fingers to activate.
Register Master PIN Code Before Programming*
1. Touch the screen with the back of your hand or fingers to activate
2. Press the
key.
Lock Response: "Register Master Code; press the
3. Press the
key.
Lock Response: "Enter a 4 to 8 digit PIN code followed by the pound key."
4. Enter new 4-8 digit Master PIN code followed by the
Lock visually confirms PIN code selection, announces "Registered".
*This initial step must be performed upon installation or after resetting the lock to factory default.
Programming and subsequent use of the lock is not possible until this step has been successfully completed.
Touch screen with the back
of your hand or fingers to
activate.
Protect your privacy; always shield your PIN code entry.
OPERATION
Touch screen with
fingers spread to
activate.
key to continue."
key.
Press the
key.
.
Enter the new Master PIN code (4~8
digits), followed by the
key.
P/N LT-503200 Rev B
16