Accessories; Hi-O Technology™ Devices; Compatibility List - Assa Abloy ePED 1386-00 Installation And Fitting Instructions

Accessories

Hi-O Technology™ devices

Compatibility list

I
Note!
Untested devices may have differing functionality: Hi-O Technology™ devices
not listed in the compatibility list (Tab. 5) have not been tested in the device
combination and may cause different functional processes. This applies especially
for activators.
The maximum number of components may not be exceeded: A maximum of
four terminals (Emergency Open module 1386D00) and eight Interfaces for locking
systems 1386S00 can be connected.
The maximum power consumption may not be exceeded: The voltage supply
must be sufficient for the power consumption of all connected components.
Limitation of function with incorrect operating voltage at the components. A
mains adapter in accordance with DIN EN 60950-1 SELV must be used. Separate
mains adapters must be connected for the supply of devices with power con-
sumption higher than 100 VA. The appropriate mains adapter, the cable lengths,
and cable cross sections must be chosen according to the local circumstances.
Check and ensure that the operating voltage at the connection points is suitable
for the components.
EN 55
Set-up operation