Bar Code Troubleshooting - Abbott ARCHITECT RHS Training Manual

Bar Code Troubleshooting

If the RSH Bar Code Reader is not recognizing an empty Sample Carrier Position or empty carrier
positions are detected as bad bar code labels, consider the following:
• Perform the Set Bar Code Transitions procedure (P-226) to edit the expected bar code read
transition field of the
type and number of characters being used.
®
ARCHITECT RSH Service Training Guide
201532-102
file SQBCR.CAL or LQBCR.CAL to a value correct for the bar code
MODULE 2: BASIC OPERATION
FOR INTERNAL USE ONLY
2-23