Power Distribution; Architect C8000 System; C8000 System Add On Card Cage; C8000 Smd/Sh Power Supply - Abbott ARCHITECT RHS Training Manual

POWER DISTRIBUTION

Power distribution to the RSH is dependent on system configuration.
® ®
ARCHITECT c8000
On the c8000 System the Stepper Motor Driver/Sample Handler (SMD/SH) Power Supply provides power
to BOTH the c8000 System and the Retest Sample Handler (RSH) Card Cage. The RSH Card Cage is a
separate card cage from the main c8000 System. It is attached to the c8000 System right side during
system installation. The RSH Card Cage receives and distributes the following voltages:
Received Voltage
+5VDC
+12VDC
+12VDC
+36VDC
c8000 System add on
Card Cage
®
ARCHITECT RSH Service Training Guide
201532-102
System
Supplied Voltage
• Sensor Interface Board (SIB)
• Sample Handler Controller/CPU Board
• Indexer
• Motor Driver Board
• Card Cage Fans (c8000 System only)
• Sensor Interface Board
• Sample Handler Controller/CPU Board
• Indexer
• Motor Driver Board
• Motor Driver Board:
- Carrier Transport X axis motor
- Carrier Transport Theta motor
- Carrier Transport Z motor
MODULE 4: POWER AND CIRCUIT BOARDS
• F1 (2A) in middle card cage area (c8000
System only)
• F2 (10A) in upper card cage area (c8000
System only)
N/A
N/A
J4 (+12VDC)
®
c8000 SMD/SH Power Supply
FOR INTERNAL USE ONLY
Fuses
J1 (+36VDC)
J6 (+5VDC)
4-5