Abbott ARCHITECT RHS Training Manual page 170

APPENDIX
4. Identify the components labeled in the picture below:
A: Carrier Transport Arm
C: X Axis drive Motor or Carrier Transport Drive Motor D: Carrier Positioner Assembly section 4
E: Bar Code Reader
G: Sample Carrier
J*: Carrier Tray
L: Transport Pulley Assembly
*Note: there is no I in the diagram below
END OF MODULE
A-16
FOR INTERNAL USE ONLY
B: Carrier Transport Assembly
F: Priority Bay
H: Carrier/Tray Sensor
K: Routine Bay
M: Flex Chain, Flex Cable or IGUS Chain
®
ARCHITECT RSH Service Training Guide
201532-102