Mechanical Hazards - Abbott ARCHITECT RHS Training Manual

Mechanical Hazards

The RSH System is an automated system that operates under computer control. As with most automated
equipment there is potential for injury and bodily harm from moving mechanical components whenever
the instrument is in operation. The ARCHITECT System minimizes mechanical hazards by providing
guards to protect against accidental contact with moving components.
The ARCHITECT System requires accurate positioning of all sample, reagents, calibrators, controls, and
consumables before executing any program. If safe guards must be removed or disconnected during setup
and testing procedures, use caution. Stay a safe distance away from the moving components; fast moving
parts may cause injury. Always replace the safe guards upon completion of setup and testing procedures. It
is never acceptable for instrument operators to reach into the instrument when it is in an operating mode.
Should intervention be necessary during a run, the run should be interrupted according to instructions
defined in the ARCHITECT Systems Operations Manual.
Injury may result in the event of an instrument malfunction or an unexpected sequence of mechanical
component movements. Basic elements of mechanical equipment safety include but are not limited to:
•
Never bypass or override a safety device unless during setup or testing activities.
•
Never operate the instrument without protective covers and barriers in place unless during setup or
testing activities.
•
Never allow any part of the body to enter a range of mechanical movement during system operation.
•
Do not wear articles of clothing or accessories that could catch on the ARCHITECT System.
•
Keep pockets free of items that could fall into the system.
•
Keep all protective covers in place when instrument is running.
•
Be especially cautions when performing adjustment, maintenance, cleaning, or repair procedures.
•
Use caution when loading sample carriers.
•
Learn your system, and follow instructions carefully.
®
ARCHITECT RSH Service Training Guide
201532-102
INTRODUCTION
FOR INTERNAL USE ONLY
15