Training Overview; Goals - Abbott ARCHITECT RHS Training Manual

TRAINING OVERVIEW

®
The ARCHITECT System is a fully-automated system allowing random and continuous access. The
Retest Sample Handler (RSH) module is the portion of an integrated instrument system with which the
operator interacts to load and unload samples. The sample-handling module moves samples from the
loading platform to each aspiration point on any processing module through an instrument system. When
testing is complete, the samples are returned to the loading platform for operator removal and storage.
The ARCHITECT System is designed to be a multi-module system. That means you can combine multiple
Processing Modules (PMs) to form one workstation that is controlled by a single System Control Center
(SCC). A single, primary Sample Handler transports samples through the system regardless of the number
of Processing Modules and types. The number of tests performed per hour and the types of assays
performed vary depending on the configuration of system.
The ARCHITECT RSH training program is an integrated, ongoing approach designed to provide the
knowledge and skills needed to perform service calls effectively on the ARCHITECT System.

Goals

Upon completion of the training program you will be able to:
Perform Basic Operations including Maintenance, Operation, and Calibration.
1.
Use diagnostic tools and interpret troubleshooting data to isolate the root cause of failure.
2.
Perform component removal and replacement procedures.
3.
Perform the procedures associated with Planned Maintenance (PM) and/or Preventative Maintenance
4.
Inspection (PMI), Instrument installation and Instrument Integration.
®
ARCHITECT RSH Service Training Guide
201532-102
INTRODUCTION
FOR INTERNAL USE ONLY
7