IKA C 2000 basic Operating Instructions Manual page 80

 7URXEOHVKRRWLQJ
The C 2000 calorimeter system is subject to strict quality control during manufac-
turing. If improper functionality should nevertheless occur, you will find in the follow-
ing section a series of malfunction situations and the appropriate measures for
remedying the malfunctions. Most malfunctions are shown in the header of the dis-
play. In addition to or instead of this, a message window may appear that the user
must acknowledge with the appropriate key/button in the control field. If your at-
tempts to remedy errors and malfunctions are unsuccessful, please contact your
authorized IKA
 0DOIXQFWLRQ ZLWK PHVVDJH LQ WKH GLVSOD\
0HVVDJH
1R DVVLJQPHQW SRVVLEOH
% %RPE ³[´ QRW IRXQG
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
®
Technical Service Department.
&DXVH
The decomposition vessel
cannot be assigned. The system
displays the malfunction and
interrupts the measurement.
Other decomposition vessels
have already been assigned to
the prepared measurements.
A decomposition vessel was
detected whose number is not
reported.
The system displays the
malfunction and interrupts the
measurement.
Incorrect number detected.
®
IKA -WERKE C 2000 basic / control
5HPHG\
Use a correctly assigned decompo-
sition vessel.
Report the decomposition vessel.
Check the code ring on the
decomposition vessel for incorrect
position or damage. In order to
continue the measurement series
you may have to turn off detection of
the decomposition vessel.
(&RQI6HWWLQJV%RPE ,'). If the
function cannot be restored, please
contact the Technical Service
Department.
Ver. 04 08.07
3DJH