IKA C 2000 basic Operating Instructions Manual page 58

3DJH 
 (YDOXDWLQJ FDOLEUDWLRQV
c
Perform several calibration experiments per decomposition vessel according to
Chapter 7 "Preparing and performing measurements". For the number of calibra-
tions required, please refer to the standard you are using.
d
After the last calibration: Activate 0HQX open the &RQI menu and then open the
%RPEV dialog box.
FRQILJXUDWLRQ RI
GHFRPSRVLWLRQ
YHVVHOV
e
Use 7DE and 8S DUURZ'RZQ DUURZ to place the cursor on the number of the de-
composition vessel with which you wish to perform the upcoming calibration experi-
ments.
f
Open the &DO dialog box.
OLVW RI
FDOLEUDWLRQV
Using the button &DOF in the window OLVW RI FDOLEUDWLRQV, carries out the acid correc-
tion for the selected calibration. The calculation is dependent on the evaluation pro-
cedure selected:
®
IKA -WERKE C 2000 basic / control Ver. 04 08.07
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com