Preparing For Installation - Viessmann Vitovalor PT2 E11T Installation And Service Instructions Manual

Preparing for installation

Siting
(cont.)
A
125
1205
Fig. 4
Wiring area
A
Preparing for installation
Use a connection set – available as an accessory – to
make the connections on the water side.
Fitting accessories
Before final siting, attach all of the accessories that are
to be mounted from the back of the boiler (e.g. connec-
tion set).
!
Please note
Avoid damaging the appliance.
Connect all pipework free of load and torque
stress.
12
Preparing connections on site:
Connection set installation instructions