Reassemble The Gas Condensing And Fuel Cell Module In Reverse Order - Viessmann Vitovalor PT2 E11T Installation And Service Instructions Manual

Installation sequence
Splitting the gas condensing and fuel cell...
4.
4x
8. 3.
1.
2.
Fig. 44
Note
Move lines with it when removing the gas condensing
module.

Reassemble the gas condensing and fuel cell module in reverse order.

Use cable ties to re-secure the condensate pipe con-
nection piece in the factory position.
Torque settings:
■ +1
Gas line fittings 20 Nm
■ +0.5
Fastening screws 1.5
46
3. 4x
Nm
(cont.)
Note
After assembly, check the tightness of the balanced
flue pipe inside the appliance.