Add New User Screen - Agilent Technologies Magnis NGS Prep System User Manual

Add New User screen

Purpose: To create new user accounts and configure the settings for the account. See
instructions in "Add new user accounts" on page 22.
To open: From the Home screen, press Settings. Press User Management. Then, press Add.
Figure 38 Add New User screen
User Name
In this field, type the user name for the new account.
Access Level
Select the access level for account (standard or advanced).
Password / Confirm Password
In these fields, type the password for the new account.
Email address(es)
In this field, type the email address of the new user. If entering multiple email addresses, separate
them with a space.
Email alert on run complete
Mark this check box to have the system generate an automatic email to the user when it
completes a protocol run that was set up by that user. The email will be sent to all email
addresses entered in the Email address(es) field.
Email alert on error occurs
Mark this check box to have the system generate an automatic email to the user when the system
encounters an error during a protocol run that was set up by that user. The email will be sent to all
email addresses entered in the Email address(es) field.
OK
This button saves the new user account.
Magnis and Magnis Dx NGS Prep System User Guide 62