Chiller Setting screen
Purpose: To set the temperature of the instrument's chiller module. See instructions in
chiller temperature"
To open: From the Home screen, press Settings. On the Settings screen press System Settings.
Then, press Chiller Setting.
Figure 51 Chiller Setting screen
Chiller Temperature
Type the desired temperature for the chiller (in °C) into the field. Note that this field is only editable
for Advanced users. Temperatures from 4°C to 12°C are permitted.
Firmware Update screen
Purpose: To install a new version of the firmware software from a connected USB disk drive or by
connecting to the Agilent website. See instructions in
To open: From the Home screen, press Settings. On the Settings screen press System Settings.
Then, press Firmware Update.
Figure 52 Firmware Update screen – USB Disk selected
Magnis and Magnis Dx NGS Prep System User Guide
on page 27.
"Install firmware updates"
"Set the
on page 47.
74