Installing Updates
Install protocol updates
When Agilent releases new protocols for the Magnis/Magnis Dx NGS Prep System, users with an
Advanced user account can install the protocols on the system through a USB disk or through an
online connection.
Upload a protocol from a USB disk
1 Save the protocol file (*.bjp) to a USB disk. (Do not use an encrypted USB disk.)
2 Insert the USB disk into an available USB port on the front of the instrument.
3 From the Home screen, press Settings.
The
4 Press Protocol Update.
The
5 Press Update Protocol.
The
6 At the top of the screen, select USB Disk.
The screen displays a browser of the USB disk contents.
7 In the browser, navigate to the protocol file (*.bjp). You can expand folders by double-pressing
on them.
8 Press the protocol file to select it.
Figure 28 Protocol Update screen with protocol file selected on USB disk
9 Press Import.
A message box opens notifying you that the protocol was imported.
10 Press OK to close the message box.
You are returned to the Protocol Update screen. The protocol has been installed.
Magnis and Magnis Dx NGS Prep System User Guide
Settings screen
opens.
Protocols screen
opens
Protocol Update screen
opens.
45