Other Settings Screen - Agilent Technologies Magnis NGS Prep System User Manual

Figure 54 Connection Settings screen
Obtain an IP Address Automatically
When this option is selected, the instrument automatically assigns an IP address.
Use Manual Configuration
When this option is selected, you need to manually assign an IP address and enter the necessary
network information into the following text fields.
• IP Address
• Subnet Mask
• Default Gateway
• DHCP Server
Renew
When the connection settings are set to Obtain IP Address Automatically, this button renews the
IP address assigned to the system. Either the previous IP address is re-assigned to the system (if
it is available) or a new IP address is assigned.
OK
This button saves your changes and returns you to the System Settings screen.
Cancel
This button cancels any changes made on this screen and returns you to the User Management
screen.

Other Settings screen

Purpose: To set the system to verify teach points during the Instrument Health Check (IHC).
To open: From the Home screen, press Settings. On the Settings screen press System Settings.
Then, press Other Settings.
Magnis and Magnis Dx NGS Prep System User Guide 76