Figure 73 Run screen when sample collection is in-progress
Run screen when libraries are ready
Purpose: Displayed when the prepared library samples are ready to remove from the chiller.
To open: Opens automatically after the system completes library sample collection.
Figure 74 Run screen when libraries are ready – Chiller notification
The instrument door is now unlocked, allowing you to remove from the chiller the green library
strip tube containing the libraries. Until you fully open the instrument door, the screen is obscured
by a notification message that counts down the remaining time before the chiller is shut off (as
shown in
Figure
74). The chiller remains at its set temperature (12°C, by default) for 2 hours
before automatically shutting off.
After you open the instrument door, the chiller notification closes and the screen appears as in
Figure
75.
Magnis and Magnis Dx NGS Prep System User Guide
91