Related Manuals for Agilent Technologies Magnis NGS Prep System
Summary of Contents for Agilent Technologies Magnis NGS Prep System
-
Page 1: Table Of Contents
Before You Begin 2 Safety Precautions 2 Environmental Requirements 4 Instrument Components 4 Starting Up the Magnis NGS Prep System 7 Turn on the instrument 7 Log in to the system 7 Creating User Accounts 8 About user access levels 8... -
Page 2: Before You Begin
USB disk with PDFs of the User Guide and Quick Reference Guide Safety Precautions The Magnis NGS Prep System is designed for safe operation when it is used in the intended manner. Using the system for purposes other than those intended may impair those safety protections. - Page 3 • Do not service the electrical components unless you are qualified to do so. Fluids and • Never process reagents not intended for use with the Magnis NGS Prep System. Reagents • Observe the relevant safety regulations when handling pathogenic material, radioactive substances or other substances hazardous to health.
-
Page 4: Environmental Requirements
Environmental Requirements Electrostatic The Magnis NGS Prep System is static sensitive. Electrostatic discharges greater than 8000 volts Discharge may interfere with the normal operation of the USB ports on the instrument. Handling precautions are required when working in high static environments. Wear a grounded wrist strap and take other anti-static precautions prior to making contact with the instrument in high static environments. - Page 5 • Barcode scanner for labware verification and sample tracking • Gantry for positioning of the micropipettor and barcode scanner • UV tube for decontamination of surfaces of the instrument deck with UV light Magnis NGS Prep System Quick Reference Guide...
- Page 6 Figure 4 Instrument deck Indicator Lights You can quickly and easily check the status of the instrument based on the color of the LED indicator lights that illuminate the entire plate filling area. Magnis NGS Prep System Quick Reference Guide...
-
Page 7: Starting Up The Magnis Ngs Prep System
Starting Up the Magnis NGS Prep System Table 2 Colors and descriptions of the LED indicator lights in the plate filling area LED Color Instrument Status Description White Ready The lights are illuminated white when the system is idle but the door is open, when the system is performing auto-teaching or teach-point verification, and when a user is setting up a protocol run. -
Page 8: Creating User Accounts
Update the number of PCR cycles during run setup Edit user accounts of other users Edit chiller temperature setting Install firmware and protocol updates Edit protocol and email alert settings Delete diagnostic reports Change default protocol version Magnis NGS Prep System Quick Reference Guide... -
Page 9: Add New User Accounts
User Management screen. Decontaminating the System The Magnis NGS Prep System includes a UV tube that can be used to decontaminate the surfaces of the instrument deck. The quick cycle is a 30-minute decontamination. Agilent recommends running the quick cycle before each protocol run. -
Page 10: Running Protocols
Running Protocols 1) System prep Prepare the Magnis NGS Prep System so that it is ready to run a protocol. 1 Verify that the instrument deck is cleared of all labware from previous runs. 2 Turn on the instrument and close the instrument door. -
Page 11: Reagent Prep
Running Protocols For instructions on manually decontaminating the surfaces of the instrument deck, consult the full-length Magnis NGS Prep System User Guide (publication K1007-90000). 2) Reagent prep Prepare the samples, target enrichment reagents, and other materials needed for the protocol run according to the user manual for your specific Magnis Target Enrichment Kit. -
Page 12: Collection And Clean Up
6 Log out of the software or turn off the instrument. To log out, press the user name at the bottom of the screen then press Log Out. To turn off the instrument, press the power button on the front of the instrument. Magnis NGS Prep System Quick Reference Guide... - Page 13 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Agilent Technologies, Inc. as governed by United States and international copyright laws.