Loading Converter Data - Siemens Sinamics G120P Instruction Manual

Loading converter data

Before you can load the actual converter's data into your project, an online connection between the
PC and the converter has to be established.
1 Click the icon "Connect to selected target devices" in the tool bar and a window appears
2 Set the access point to "DEVICE" and place a checkmark next to the converter name and click OK
A connection is now established
3 An online/offline comparison is displayed, click "Load HW configuration to PG" and close the window
1
STARTER software and PC:
66
2
Mounting and preparation
3