Siemens Sinamics G120P Instruction Manual page 88

Parameterizing the PID characteristic
1 Access "Technology controller" in the project tree
2 Select "Technology PID controller"
The PID controller opens in the work area
3
Start the parameterization by clicking on the blue binector button next to "PID controller activation"
A window with relevant parameter opens
4 Select 1 for activation and click OK
5 Define the setpoint source by clicking in the appropriate field
A window with relevant parameters opens
Choose P2201 for fixed value 1 and click OK
1
2
STARTER software and PC:
76
3
5
4
6
Application cases