Siemens Sinamics G120P Instruction Manual page 66

Changing the Y-axis right
• If required the Y-axis right can also be configured
• Select "Yes" and press OK
• Choose the required output parameter
• In our example: "Voltage output r0025"
• Press OK
• Select the required unit
• In our example: "Volts"
• Press OK
• Select the required number of unit digits
• In our example: "0"
• Determine maximum value
• Determine minimum value
• In our example: ranging from "0 to 400 V"
• Press OK
Operator Panels BOP-2 and IOP-2:
54
Yes
OK
OK
Volts
OK OK
Max value: 0400
OK
Intelligent Operator Panel
r0025 voltage output
OK
0
OK OK
Min value: 0
OK
OK
OK
OK