Siemens Sinamics G120P Instruction Manual page 4

Materials and Tools
The components listed below are presented in this booklet. To test your knowledge on the actual
product, you have the choice between ordering the following alternatives:
Training case
Product
• SINAMICS G120P case*
Single components
Product
• SINAMICS G120 PM230 FSA 0.55kW
• SINAMICS G120 CU230P-2 HVAC / BT
• Motor (0.12 kW)
• SINAMICS PC Connection Kit-2
• Basic Operator Panel BOP-2
• Intelligent Operator Panel IOP-2
• Screening Kit 2
Optional components
Product
• IOP-2/BOP-2 door mounting kit
You will also need the following equipment:
• PC / PG with USB interface
• Switches – commercially available*
• Potentiometer – commercially available*
• Various M4 screws and nuts (length depends on installation location) with suitable screwdriver/
wrench – commercially available*
* The training case is a complete demo station including a motor, the power module of the converter, switches, lights and a
230 V power supp ly connection.
Order No.
A5E03828108
Order No.
6SL3210-1NE11-7UL0
6SL3243 6BB30 1HA2
1LA7060-4AB10
6SL3255-0AA00-2CA0
6SL3255-0AA00-4CA1
6SL3255-0AA00-4JA0
6SL3264-1EA00-0FA0
Order No.
6SL3256-0AP00-0JA0